Your EJD logins
Your catalog and costs come from your own EJD accounts. Connect your ECOM login (and BRICK, for store-only items) in Settings > EJD feed. The app warns you early if a login or file stops working.
Your catalog and costs come from your own EJD accounts. EJD gives each dealer an SFTP login (a username and password for collecting files) for each account:
- ECOM: the items EJD ships to your customers, and what each costs you. Usually the same login as your EJD EDI.
- BRICK: the items EJD sells to your store but doesn't ship to customers (store-only). Skip it if you don't sell store-only items.
Nothing from EJD shows in the app until your own login works. There's no shared catalog to start on.
If Settings > EJD feed says Striven's own EJD accounts, your store uses the accounts Striven already collects, and there's nothing to connect.
What comes from your files, and what doesn't
Your files decide which items you can get and what each one costs you. Everything else about a product (its title, description, pictures, specs and restrictions) comes from Striven's master catalog, which is the same for every store and which Striven keeps cleaned up. If your account lists an item the master doesn't have yet, it comes from your own file, so nothing you can get is left out.
Stock counts come from EJD's warehouse stock file, which Striven collects once for every store. Choose which warehouses count under Where stock comes from on the Stock page.
Under each login, Settings > EJD feed shows how your file compares with the master: "Your file matches Striven's master", or how many items are at your own cost, not open to your account, or only on your account.
Don't have an EJD login?
Many stores that order from EJD the usual way have never had file access. You need it for this app, so ask EJD for it:
- Contact your EJD representative, the person you usually deal with at EJD.
- Ask for SFTP access to your account's catalog and inventory files for your online account (ECOM). If you sell store-only items, ask for your store-only account (BRICK) too. Each account has its own login.
- Give them your EJD store number, from your invoices.
EJD sends a username and password for each account. When you have them, connect them as below. You can finish setup while you wait.
Before you connect
EJD removes catalog (Article) files from your account once they're downloaded. If another tool already reads them, for example an import tool or your previous EDI or dropship service, it stops getting them. Turn that tool's feed off first.
Connect
- Go to Settings > EJD feed.
- Under Online items (ECOM), enter your ECOM account number. It's the digits in your file names: for
ST36563_…it's 36563. - Enter the SFTP username and SFTP password EJD gave you for that account.
- Select Connect and test. The app lists your folders to check the login. Nothing is downloaded until the test passes.
- If you sell store-only items, do the same under Store-only items (BRICK) with your BRICK account. ECOM and BRICK are separate accounts with different numbers.
The app then logs in to each account a few times a day and copies its new catalog file. Each login shows a badge: Waiting for the first file, Connected, Files late, Login failing or Closed.
The first time you connect a login, a live store goes back to compare mode, so you can review the cost and price changes before anything is written. If your store is waiting for approval, the first file named with your store number approves it.
To change a password later, enter the new one and select Save and test. Leave the password blank to keep the saved one.
Only one login (ECOM or BRICK)
You don't need both. With only one login connected:
- ECOM only: the app works with EJD's online items only. Store-only (BRICK) items don't show on What's new, Products or claims, and none are added to your store.
- BRICK only: the app works with your store-only items only. EJD's online items are left out the same way.
If your store already has items from the account you didn't connect (for example, store-only items the app added before), runs stop with STOP_FILE_MISSING instead of treating those items as gone. Connect that login too, or contact support.
Adding the second login later:
- Connect it under its own heading in Settings > EJD feed, as above.
- A live store goes back to compare mode, so you can review what the new account brings before anything is written.
- Runs wait (STOP_FILE_MISSING) until the first file from the new login arrives, usually within a few hours. Then the next run brings in that account's items, following your settings (for store-only items, Items EJD only sells to stores in Settings > Pricing and safety).
If something stops working
The app tells you early and waits a long time before it does anything. It never takes products down because a file is missing.
- Login failing: EJD turned down the login for 6 hours. You get an alert, emailed, and a reminder each day. Your store keeps its current catalog and prices.
- Files late: the login works, but EJD hasn't posted a catalog file for 2 days. You get an alert and daily reminders. Your store keeps its current catalog and prices.
- After 14 days without a new file, catalog updates pause: prices worked out from costs that old could sell below cost. Your products stay exactly as they are until a new file arrives.
- A file that looks wrong, for example one that leaves out a lot of what you carry, is held for Striven to check with EJD instead of being used. Your store keeps the last file meanwhile.
- Closed: only Striven marks an account closed, after you or EJD confirm it.
FEED_DEALER_LOGIN_FAILED
EJD's server turned down your ECOM or BRICK login. Your store keeps its current catalog and prices, and nothing is taken down.
- Check the username and password with EJD.
- In Settings > EJD feed, enter them again under that account and select Save and test.
A login that was working and starts failing is tried again every couple of hours, not constantly, so it doesn't lock your account. A login that failed its test when you saved it waits until you save it again.
FEED_DEALER_FILES_LATE
Your login works, but EJD hasn't posted a catalog file to it for at least 2 days. Your store keeps its current catalog and prices. If your account is on hold, or EJD changed something, check with EJD. After 14 days without a file, catalog updates pause (STOP_DEALER_FILES_STALE).
DEALER_FILE_HELD
A catalog file from your account was held instead of used, because it looks like a problem at EJD rather than a real change: its item count is very different from the file before it, costs, suggested prices or case sizes changed on far more items than EJD ever changes at once, or it leaves out a large share of what your store carries (HOLD_DEALER_MASS_DROP). Using it could discontinue or reprice those items.
Your store keeps the last file. You don't need to do anything: Striven checks with EJD and releases the file if the change is real. A newer good file from EJD also replaces it.
HOLD_DEALER_MASS_DROP
A catalog file from your account leaves out at least 25 of the items your store carries from that account, and more than 5% of them. It's held (DEALER_FILE_HELD) until Striven checks it with EJD.
STOP_DEALER_FILE_HELD
The catalog run stopped because your newest catalog file wasn't used: either it's held for Striven to check (DEALER_FILE_HELD), or it failed its format checks (STOP_FORMAT_CHANGE). The run doesn't fall back to an older file. Nothing reached your store.
- Held: you don't need to do anything. Striven checks it with EJD.
- Failed its checks: you don't need to do anything. Striven is alerted and asks EJD for a corrected file. If you have questions, contact support with the file name from the run's banner.
The next good file from your login starts a run by itself.
STOP_DEALER_FILES_STALE
The catalog run stopped because your newest catalog file is more than 14 days old: prices worked out from costs that old could sell below cost. Your products stay as they are.
- Open Settings > EJD feed and check the login's badge and its last file.
- If the login is failing, fix it as in FEED_DEALER_LOGIN_FAILED.
- If the login works, ask EJD why no file has been posted.
The next file starts a run by itself.
DEALER_ACCOUNT_CLOSED
Striven marked your EJD ECOM or BRICK account closed, after you or EJD confirmed it. Catalog updates stop, and for ECOM, orders aren't sent to EJD. Your products stay as they are. Contact support if the account is open.
STOP_DEALER_CLOSED
The catalog run stopped because one of your EJD accounts is marked closed (DEALER_ACCOUNT_CLOSED). Nothing reached your store. When Striven opens the account again, a run starts by itself.
ORDER_ACCOUNT_CLOSED
A paid order wasn't sent to EJD because your ECOM account is marked closed. The order is held, and your customer has paid. Fill it another way, or once Striven opens the account again, send it from Orders.
Technical details
Show the exact rules, for the technically minded
- Each login is collected every 4 hours (6 times a day), each at its own fixed offset of up to 30 minutes so many stores don't hit EJD's server at once.
- A working login that starts failing is tried again every 2 hours. A login whose test failed when you saved it isn't tried again until you save it again, because repeated failed logins can lock an EJD account.
- Login tests: 5 per hour per store. The account number must be 3 to 8 digits, and ECOM and BRICK can't use the same number.
- Only Article (catalog) files are copied from your login. Stock and EDI documents aren't read from it.
- Your files decide only cost (
Wholesaler_cost_per_Each) and EJD's announced future cost. Every other column comes from Striven's master. - An item that drops out of your file is kept at its last cost for 24 hours before it counts as gone, so one short file never discontinues anything.
- Late: no new file for 2 days since the last one (or since you connected). Stale: the newest file's date (EJD's stamp in the file name, or when it arrived) is more than 14 days old.
- Held files: fewer than 90% or more than 115% as many rows as your last good file from that login; on files of 500 items or more, cost changed on over 35% of items, suggested price on over 25%, order multiple on over 5%, or over 15% of items new or gone; or a mass drop (at least 25 of the items you carry from that account, and more than 5% of them). Striven can release a held file from the dealer's Platform page. A file that failed its format checks (missing columns, wrong warehouse, unreadable) can't be released: Striven gets a DEALER_FILE_REFUSED alert and asks EJD for a corrected file, and the dealer gets STOP_FORMAT_CHANGE.
- With no login for a channel, the store's catalog for that channel is empty, as long as it carries no items from it. If it does carry some, there's no catalog for that channel and the run stops, so nothing is read as discontinued.
- Downloaded files are kept 90 days, and the newest good file of each account is always kept.