Support › Getting started

Connect your EJD logins and EDI

Short answer

Enter your EJD store number in setup, then connect your own EJD logins in Settings > EJD feed so your catalog and costs appear. To send orders to EJD, also add the EDI login EJD gives you.

The app needs three things from EJD, in this order:

  1. Your EJD store number, in setup. It tells EJD which orders are yours.
  2. Your EJD logins (ECOM, and BRICK if you sell store-only items), in Settings > EJD feed. Your catalog and costs come from these. Nothing from EJD shows in the app until one works.
  3. Your EDI login, in Settings > EJD EDI login. Only if you want the app to send your orders to EJD.

New to these words? See the glossary.

Store number

  1. On the first setup step, Welcome, enter Your EJD store number. It's on your EJD invoices and statements: digits only, for example 12345. It's usually the same number as your ECOM account in EJD's file names (ST36563_… is account 36563).
  2. Select Continue.

If setup says That EJD store number can't be used here, another store that's already approved uses it. Check the number on your invoice. If it's right, contact support.

You can see the number later in Settings > EJD EDI login, as EJD store number. It can't be changed there. Changing it in setup puts your store back to waiting for approval: see Store approval.

Your EJD logins (catalog and costs)

EJD gives each dealer an SFTP login (a username and password for EJD's file server) for each account. Most stores have two: ECOM for online items and BRICK for store-only items.

  1. Turn off any other tool that downloads your EJD catalog files, such as an import tool. EJD deletes a catalog file once it's downloaded, so only one tool can get it.
  2. Open Settings > EJD feed. The last setup step and the Waiting for approval page both have a Connect my EJD logins button that goes there.
  3. Under Online items (ECOM), enter the ECOM account number, SFTP username and SFTP password, and select Connect and test.
  4. If you sell store-only items, do the same under Store-only items (BRICK).

When the first catalog file named with your store number arrives from your ECOM login, your store is approved and your first run starts. Full details, and what to do if a login stops working: Your EJD logins.

EDI login, for sending orders

Sending orders needs EDI orders, part of the Online and Growth plans. EDI is the standard way EJD takes orders as files. EJD has to set it up for your account first.

  1. Open Settings > EJD EDI login. The Getting set up with EJD list shows each step and ticks it off as you go.
  2. Select Copy the request and send it to your EJD sales rep. It asks for a trading partner ID and an SFTP login to EJD's EDI server.
  3. When EJD replies, enter the Trading partner ID, SFTP username and SFTP password under Your EJD EDI login.
  4. Leave Sending to EJD on Not sending yet until you're ready. Orders are checked and held, and nothing goes to EJD.
  5. If another tool already sent EJD orders under this trading partner ID, enter a First control number above the last one it used. Ask EJD if you're not sure.
  6. Select Test and save. A banner says Connected or Not connected. If the test fails, see EDI login test failed.
  7. In Settings > Orders, under Shipping methods, give each of your checkout's shipping methods an EJD code: GR ground, 2D two-day or ND next day.
  8. When you're ready, set Sending to EJD to Real orders, tick Read EJD's order replies (acknowledgements, ship notices, invoices), and select Test and save. Send your first real order on its own and wait for EJD's confirmation on the order before sending the rest.

Then choose how orders are sent: see Turn on writes.

If you see EDI_NOT_CONNECTED

An order was ready to send to EJD, but the app couldn't log in to EJD's EDI server. Nothing was sent.

No login saved, or the last test failed. The order is marked Problem and tagged EJD-Problem.

  1. If there's no login yet, follow the EDI steps above until the banner says Connected.
  2. If there is one, select Test and save in Settings > EJD EDI login. If it fails, see EDI login test failed.
  3. Once a test passes, those orders go back to Sending soon and are sent. You don't need to send them one by one.

The login was working, then EJD's server stopped letting the app in (an outage, or a password changed with EJD). The orders stay Sending soon and the app keeps trying. After 2 hours you get one alert, Orders are waiting: the app can't log in to EJD, listing them.

  1. Select Test and save in Settings > EJD EDI login.
  2. If it passes, EJD's server was out of reach. The waiting orders go out right away.
  3. If it fails, fix the login with EJD and save it again.
  4. To stop an order you've filled another way, open it and select Hold for review, then Mark handled, don't send. The app closes it and never sends it to EJD.

The alert Orders are waiting: the app can't upload to EJD works the same way: the app logged in but couldn't reach EJD's Inbound folder. Nothing was uploaded, so the orders are safe to send again.

If you see EDI_NOT_SENDING

An order was ready to send, but Sending to EJD in Settings > EJD EDI login is set to Not sending yet. The app checked the order and held it. Nothing was sent to EJD. Your login is fine: there's nothing to fix there.

  1. When you're ready to send real orders, open Settings > EJD EDI login, set Sending to EJD to Real orders, and select Test and save.
  2. Open Orders and select the Needs you filter. Open each held order and select Check again. It goes back to Ready to send (or Sending soon with automatic sending).
  3. Send it as usual. Held orders don't go out on their own when you change the setting, so you can check each one first.

If you filled an order another way while it was held, select Mark handled, don't send instead.

If another service sends your orders today

Don't run both. Each would send the same purchase order, and EJD can't cancel one. Switch in a single hour: turn the other service's sending off, turn the app's on, then change your SFTP password with EJD so only the app holds it.

Technical details

Show the exact rules, for the technically minded
  • Store number: 4 to 8 digits. Sent on every purchase order (850) as your vendor reference. Only one approved store can hold a number; stores waiting for approval may share one until Striven approves the right store.
  • Feed logins: ECOM and BRICK account numbers are 3 to 8 digits, as in EJD's file names. The ECOM login reads files for your catalog warehouse (IL01 unless you chose another); BRICK reads WA01. Each login is polled about every 4 hours, with a fixed offset of up to 30 minutes. A failing login is retried every 2 hours, so EJD never locks the account.
  • EDI login test: lists folders only; nothing is downloaded, moved or deleted. The login is saved whether the test passes or fails. Up to 5 tests an hour. The password is stored encrypted and never shown again.
  • Trading partner ID: 2 to 15 letters or digits.
  • First control number: where the envelope control numbers start (ISA13, GS06, ST02). Only before the app's first purchase order, and only upward, since EJD rejects a number it has already seen from your trading partner ID.
  • Real orders and replies: with automatic sending on, Sending to EJD must stay on Real orders. With sending on at all, reading EJD's replies (855, 856, 810) must stay on. Reading a reply can remove it from EJD's server.
  • Retry timing after a lost connection: one login attempt for the whole store every 10 minutes, then every 30 minutes once orders have waited 2 hours, when the alert is raised. The alert closes when the orders are sent, or within the hour once none are waiting (all held or cancelled).

Related

Still stuck? Open Help and support inside the app to ask about your own store or write to a person.